"Cream to Clean" Cleansing Foam

This cleansing foam gently rids your face of dirt and makeup and is suitable for all skin types.

The combination of the extremely mild surfactants Sodium Lauroyl Glutamate and Lauryl Glucoside creates a very creamy, fine-pored foam. The high proportion of the humectants propanediol, glycerin, and jojoba ester gel effectively preserves skin moisture and makes the product even milder. Calcium Pantothenate has a moisturizing, soothing, and irritation-reducing effect.

Difficulty level: ⭐easy

Preparation time: ⏱ approx. 20 minutes

Ingredients in percent

A1 53.2 dist. water
1.3 citric acid
0.5 Calcium Pantothenate
2 Preblend Aqua
A2 25 Sodium Cocoyl Glutamate (30%)
B 6 Lauryl Glucoside
C 5 Propanediol Green
5 glycerin
2 jojoba ester gel

YIELDS 100%

Instructions

  1. Weigh all ingredients from A1 and stir until all substances have dissolved clearly in the water.
  2. Now add A2. The mixture will become cloudy due to gas formation. Wait briefly if necessary until the air has escaped.
  3. Weigh B (Lauryl Glucoside) into a heat-resistant container and heat it slightly until it is liquid and clear (approx. 30-40 degrees is sufficient). Alternatively, you can heat the container in a water bath beforehand, so you can work with the liquid product immediately.
  4. Now add B to A1/A2 and stir in well.
  5. Then weigh phase C and stir C together until the jojoba ester has dissolved clearly.
  6. Now add C thoroughly to A/B.
  7. Adjust the pH value to approx. 5.3 – 5.5.
  8. Fill your product into a foamer bottle. The surface foam will dissolve overnight. A crystal-clear solution will remain.

Tip:

Fill the product into a foamer bottle . The surface foam will dissolve overnight, leaving a crystal-clear solution. You can find out why distilled water is important here.